Automated weighing systems
We manufacture various automated weighing systems used for vehicle weighing processes
AT 07 system
The vehicle weighing system based on a self-service terminal (with an alphanumeric keyboard)
The AT 07 system allows to perform weighing operations on the basis of a self-service terminal. Depending on a system version, a driver may perform weighing by means of a RFID card, a unique number or by entering all information on the terminal keyboard.
The AT 07 system is a perfect solution for companies with an average ratio of weighing operations.
AT 06 system
The vehicle weighing system based on a card reader
Within the scope of the AT 06 system, a driver is identified by a proximity card. The driver holds his/her card near the reader, the reader performs a read-out operation, then a green light flashes, informing that the weighing process was carried out properly.
The AT 06 system is mainly designed for companies where the weighing ratio is very high.
AT 05 system
The remote operated vehicle weighing system
Within the scope of the AT 05 system, the weighing process is initiated by a driver pressing a key on a remote control. Data about a certain customer and products is assigned to each remote control.
The AT 05 system is perfect for companies where the majority of drivers are in-house drivers (e.g. agricultural enterprises).
AT 04 system
The vehicle weighing system based on displays and number plate recognition
In the AT 04 system, operations on the weighing device are controlled by means of lights. During mass weighing, a series of photographs is taken and a vehicle’s plate number is recognised.
The AT 04 system may be used in companies with a high and very high weighing ratio.
AT 03 system
The vehicle weighing system with barrier gate operation, Automatic Number Plate Recognition (ANPR) and printing-out of weighing results
In the AT 03 system, the traffic is controlled by means of barrier gates. Upon stopping a vehicle on the weighbridge, a number plate recognition process is automatically initiated.
The AT 03 system may be used for companies with an average and high ratio of weighing operations.
AT 02 system
The vehicle weighing system based on card readers and LED displays
Under the AT 02 system, a driver initiates a weighing procedure by holding a card near the proximity reader. Then the display shows commands informing about subsequent steps to be taken (e.g. PULL INTO A WEIGHBRIDGE).
The AT 02 system is designed for companies with a very high weighing ratio.
AT 01 system
The vehicle weighing system based on a self-service terminal (with a numeric keyboard)
The AT 01 system uses data stored on the RFID cards to identify a customer. Upon approaching the card to the terminal, there appear all data related to the customer and assigned to the card. A driver can choose a weighing type and product.
The AT 01 system may be used in companies with an average ratio of weighing operations.
